Skip to content

category: furniture

overhauling the coffee table

This wood-and-tile coffee table had been in the apartment before we decided to turn it into a vacation rental, and had suffered some abuse at the hands of the previous tenants (not us!). We debated buying a new one or asking the owner to find one for us, but we both felt like it had some hidden potential…so I dragged it out into the carport and decided to get started on transforming it.

table before

detail before

I had already started sanding here, to see what I could do with the cigarette burns and scratches. I had this grand plan to sand down all the wood surfaces and stain them a gorgeous dark walnut, and then paint the tile creamy white with a glossy finish. But alas…

detail before_2

Oh snap! That’s either laminate, or the thinnest, crappiest veneer I’d ever seen. one quick pass with some sandpaper and it started coming right off. I was pretty surprised since the piece is super heavy…I wasn’t expecting hardwood, but there’s definitely real wood underneath so I was hoping for at least a decent layer of veneer. So much for the “dark walnut stain” plan. paint became the order of the day:

table after

I used some of the same materials as I did for the old laminate dresser: Zinsser BIN primer and off-the-shelf Behr Swiss Coffee paint in a flat finish. 3 coats with a little light sanding in between and I was good to go. The tile, however…well, I was afraid. The “grout” turned out not to be grout at all, but caulk of an unidentified nature. I wasn’t sure how well the primer or paint would stick to it. Turned out it was just fine (and I’m pretty sure now that it was latex caulk). The key was just to apply super thin, even coats, let them dry thoroughly, and lightly sand in between coats with some 220 grit paper.

detail after_1

I sealed all the wood parts with a coat of Minwax Polycrylic in satin, with an second coat on the top surface for extra protection. As with the dresser, water-based poly instead of oil-based is pretty important…the oil-based kind can yellow over time and muck up that crisp finish. The tile section got 3 carefully applied coats of gloss Polycrylic – with a light sanding in between – since I wanted a contrasting, shinier finish. Although I was super scared that I’d leave huge brush marks in the poly and mess the whole thing up, the tiles actually came out incredibly smooth and glossy! It’s hard to see the level of shine in the pics, but it looks like “real” tile again and you’d never know that it was painted.

detail after_2

Plus the whole piece is now resistant to damage from water, spills and whatever else might get thrown at it. Love it!

refinishing a sad old laminate dresser

The very first furniture project I tackled for the Hideaway was this laminate dresser that had definitely seen better days. The owner (we manage the property and live next door; he owns the place) dropped it off when I added dressers to the list of “must-haves” for the bedrooms. I took one look and knew it was going to be my next project. John was practically in the car already to head to Home Depot for supplies…he knows me well.

dresser_before

The drawers were looking pretty gnarly…all scratched up from the hardware getting loose. And in one area, the material was held together with glue and scotch tape!

drawers_before

The old brass hardware was looking pretty sad; I decided to remove them, clean them and spray paint them oil-rubbed bronze (I used Rust-Oleum Universal spray paint in Oil Rubbed Bronze, which is FANTASTIC). Obviously, this is the before shot:

hardware

Since the dresser was laminate, not veneer or hardwood, I couldn’t just sand it down and stain it…the sanding would have totally removed the top layer and ruined the piece. So I decided to go for a vintage, casual beach house vibe with some creamy white paint.

First I sanded down the scratches, dents and rough edges, and then went over every surface really lightly, by hand, with some fine grit sandpaper. After cleaning up the dust, I applied a coat of Zinsser BIN primer with a small foam roller. I learned about this primer when researching how to refinish laminate furniture, and I LOVE IT. It sticks to laminate even without sanding, and since it’s alcohol/shellac-based, it’s completely dry in 45 minutes.

When the primer was dry I lightly hand-sanded just to make sure there were no bumps or bubbles, and then moved on to paint. I used Behr Swiss Coffee in flat, an off-the-shelf color I picked up at Home Depot. It’s a nice creamy white, just barely off-white and not too bright. It took 3 coats to get a perfect, even, saturated finish, but with the foam roller it was done in no time.

The next morning I grabbed my electric sander and decided to add some distressing to the edges for that rustic beach cottage look. One quick pass over all the edges and it was just the way I wanted it!

detail_1

To finish it off, I coated the piece with Minwax water-based Polycrylic in Satin. Regular oil-based polyurethane will amber or yellow over time, so for white/light-colored projects, water-based poly works better. This was my first time using spray poly, and by the second drawer I really got the hang of it. Easy! Just use even strokes that overlap slightly, keep the can moving, and start spraying BEFORE you get near the piece, to minimize any bubbles or blobs that can sometimes happen. I ended up using 3 thin coats of the spray poly, with a little light sanding in between, for a perfectly smooth, nicely-protected surface.

Here’s the finished product in the master bedroom. I love the way the hardware came out!

after_1

I even lined the drawers in a retro-looking green print wrapping paper to round out the whole vintage beachy vibe I was going for:

after_2

nightstand facelift

When we were getting the Hideaway ready to rent out, one of the major necessities on our list was a set (matching or not) of nightstands for the master bedroom. After scouring Craigslist and thrift stores for some rehab-able nightstands, we stumbled upon Inter-Island Hotel Furniture. When hotels renovate, the old stuff gets sent here, where you can buy it for pretty amazing prices. If you’re into DIY, it’s an awesome resource. Hotel furniture may not always be the most stylish, but for the most part, it’s built to last. So with a sander and some new hardware, paint, or stain, you can create some really interesting pieces for your home.

The nightstands we picked were fresh from the Hilton Hawaiian Village, which has been renovating one of its buildings. The pair were in great shape but just needed some TLC to look fresh and match the decor at the Hideaway. I had planned to stain the tops dark walnut and paint the bottoms and the legs (just like I’d been planning for the coffee table). But these nightstands had other plans for me, as the top inset panel wasn’t wood at all, but some kind of “marbleized” vinyl laminate (again, so similar to my discovery with the coffee table!).

old-nightstand

So…Swiss Coffee to the rescue. I’ve been using this off-the-shelf Behr paint for most of the projects around the house, and it’s perfect for the breezy island cottage look that we’ve been going for (it also doesn’t hurt that I have a whole gallon laying around just waiting to be used up). It’s just slightly off-white, so it’s crisp without being blindingly bright.

I cleaned the pieces, lightly sanded, and primed with a coat of Zinsser BIN. As with the other pieces I’ve done recently, I applied 3 coats of the paint with a little sanding between coats for a perfectly smooth finish. For the paint, I used a foam roller for the flat surfaces and a small, high-quality craft brush for the details.

Here’s one of the nightstands all done, stocked up with a few beach reads and topped with a ridiculous tropical lamp that the owner brought over. Hey, it’s Hawaii. Ridiculous tropical lamps are a-ok in a vacation rental over here.

DSC_0687

I lightly distressed all the edges by hand to coordinate with the refinished laminate dresser that lives in this room. The sanding really helped bring out the leaf pattern on the drawers:

DSC_0682

I finished the pieces with a coat of Minwax Polycrylic in Satin (with a second coat on the top panel for extra protection). Everything came out totally smooth and uniform — you’d never know that the ugly vinyl top panel was ever any different than the rest of the nightstand. Love ’em!

Related Posts Plugin for WordPress, Blogger...